Edit Route Menu - Black Box 5000 series Reference Manual

Edit Route Menu

Option
1. Destination
2. Next hop
3. Network mask
4. Status
Enter:
destination IP address (up to 15 characters)
> 192.3.44.0
The above display is the first level of the EDIT ROUTE MENU. The destination network IP address must be entered as
well as the subnet mask size associated with the destination IP address. Once the destination network IP address and mask
size have been entered, the next hop IP address or remote site ID/alias must be entered.
The menu title will change to indicate the destination IP network address and the subnet size that are being edited.
Option
1. Destination
2. Next hop
3. Type
4. Cost
5. Private
6. Add/Remove
7. Network mask
8. Status
Enter option number, "=" - main menu, <TAB> - previous menu
>
NOTE: A Static Route will NOT be replaced with a RIP route, even if the cost is lower.
Menus Reference Manual: Edit Route Menu
EDIT ROUTE MENU
Value Description
"none" [0] - Destination IP address
"none" - Next hop address
*"none" - The network mask for the route
*[undefined] - Is the address in the table
EDIT ROUTE MENU
Value
"199.45.67.00" [26]
"198.65.43.21"
*"LOCAL"
[1]
[disabled]
*"255.255.255.192"
*[absent]
Description
- Destination IP address
- Next hop address
- Type of route
- Cost to reach destination in hops
- Do not advertise route
- Add/Remove information in table
- The network mask for the route
- Is the address in the table
182