Table of Contents
Advertisement
Menus Reference Manual: Server IP Address Pool Menu
Server IP Address Pool Menu
Option
1. IP address pool
2. Show address pool
3. Add static Address
4. Remove static address
Enter option number, "=" - main menu, <TAB> - previous menu
>
The SERVER IP ADDRESS POOL MENU contains options used to view and maintain the Server IP address pool for
the DHCP server of this device.
1 - IP Address Pool
The IP address pool option sets the IP address pool. A block of IP addresses may be configured from which the server
will hand out IP addresses. The first address in the range must be specified followed by the number of addresses
desired.
Default:
none
Range:
1 to 253 addresses
Considerations:
IP address assigned to the pool must be on the same IP network or the LAN of which this P1700 is a part.
The IP address pool is not allowed to contain a network broadcast address (all binary 1s in the host portion of the
address) for the network or subnetwork in which the pool resides or for a standard Class A, B or C network.
If a pool assignment will contain a disallowed address, the following message will appear:
Size will create addresses outside network's valid range,
Use a smaller pool size or a different starting address.
SERVER IP ADDRESS POOL MENU
Value
Description
[none]
- Specify IP address pool
- Display allocated addresses
- Specify clients IP/MAC address
- Remove static IP address
140
Advertisement
Table of Contents
