Black Box 5000 series Reference Manual page 183

5000 series bridge/router ppp menu reference manual
Hide thumbs Also See for 5000 series:
Table of Contents

Advertisement

1 - Destination
The destination IP address to be entered into the static routes table. The IP address is entered as four decimal numbers
between 1 and 255, separated by decimal points. After the IP address is entered, the mask size will be requested; enter a
number between 1 and 32 to indicate the number of bits to be used for the subnet mask. A mask size of 32 will specify
the exact destination address entered.
2 - Next Hop
The Next Hop option defines the IP address or remote site profile ID or alias of the next-hop router to be used to
reach the destination IP address.
3 - Type
The Type option displays the type of route. The route type may be either RIP or LOCAL. RIP is a learned route from
the RIP updates on the network. LOCAL is a static route entered by the operator of the router.
4 - Cost
The Cost option defines the number of hops required to reach the destination IP address.
Default:
[1]
Range:
1 - 15
5 - Private
The Private option when set to enabled causes the P1700 to not advertise this route in the RIP messages.
Default:
[disabled]
6 – Add/Remove
This option toggles between Add and Remove depending on whether the entry is present in the route table or not.
The Add option adds the IP address to the routing table.
The Remove option removes the IP address from the routing table. If the route is a RIP route, the route may be re-
learned by the next RIP route update from partner routers.
7 - Network Mask
The subnet mask for the destination IP network is calculated from the entered destination IP network address and the
subnet size value. The resulting subnet mask is displayed here. This is a display only value.
8 - Status
The Status option tells whether the address is "Present" or "Not Present" in the Routing Table. When the address is
first entered, "Added" is the Status value. The * beside the value indicates that this value is changed automatically as an
address is added or deleted and cannot be manually redefined.
Default:
* [Not Present]
Menus Reference Manual: Edit Route Menu
183

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lr5100a-tLr5200a-r2

Table of Contents