Lan Set-Up Menu - Black Box 5000 series Reference Manual

LAN Set-Up Menu

Option
1. Bridge set-up
2. IP set-up
3. IPX set-up
4. LAN interface type
Enter option number, "=" - main menu, <TAB> - previous menu
>
The LAN SET-UP MENU contains options used to enable the router to be recognized as a device on the Local Area
Network(s). This will enable it to bridge and route data and connect to other routers across the LAN, and allow SNMP
Network Management Stations to be able to access the router's SNMP agent.
1. Bridge Set-Up
The Bridge set-up option directs you to the LAN Bridge-STP Menu where STP Port parameters are set.
2. IP Set-Up
The IP set-up option takes you to the LAN IP Set-Up Menu where LAN IP routing parameters may be set for this router.
3. LAN IPX Set-Up
The IPX set-up option directs you to the LAN IPX Set-Up Menu, where network numbers may be assigned for the four
IPX frame types supported by this router.
4. LAN Interface Type
The LAN Interface Type option defines which variety of Ethernet LAN is connected to this router.
Default: 10BaseT
Choices: 10BaseT, 10Base2, 10Base5
Menus Reference Manual: LAN Set-Up Menu
LAN SET-UP MENU
Value
menu
menu
menu
[10BaseT]
Description
- Define LAN port STP options
- Define IP parameters
- Define IPX network numbers
- Set LAN interface type
26