Set Your Primary Network Logon (Novell Server Connection)103 8.3.6 Set Your Access Control (Novell Sever Connection); Make Your New Connection (Novell Server Connection) - Black Box LRB500A User Manual

5. Click OK to return to the Network dialog box.
6. In the Network dialog box, Configuration tab, select Client for NetWare
Networks.
7. Click Properties.
8. On the General tab, in the Preferred server field, enter the name of your
Novell Server Domain. If necessary, select the First Network Drive, then
ensure that Enable logon script processing is checked (enabled). It's the
default.
9. Click OK to return to the Network dialog box.
8.3.5 S Y P
ET OUR RIMARY
Windows 95/98:
1. In the Network dialog box, Configuration tab, select Client for NetWare
Networks as the Primary Network Logon.
2. Click OK. You are returned to the desktop.
8.3.6 S Y A
ET OUR CCESS
Windows 95/98:
1. In the Network dialog box, select the Access Control tab.
2. In the Control Access to shared resources using box, select Share-Level
Access Control.
You must restart your system for the new settings to take effect.
8.3.7 M Y N
AKE OUR
Windows 95/98:
1. Double-click My Computer.
2. Double-click the Dial-Up Networking folder.
3. Double-click Make New Connection (or Add New Connection, Win98).
4. Follow the onscreen instructions to configure your connection.
N L
ETWORK OGON
C (N
ONTROL OVELL
C (N
EW ONNECTION
CHAPTER 8: LAN Client Settings
S C
ERVER ONNECTION
NOTE
S C
OVELL ERVER ONNECTION
)
)
103