Black Box 5000 series Reference Manual page 191

Menus Reference Manual: Edit Static IPX Route Menu
Edit Static IPX Route Menu
Option
1. Status
2. Network
3. Interface
4. Hops
5. Ticks
Enter:
entry id (from 1 to 50)
> 1
The above display is the first level of the EDIT ROUTE MENU. The table id number must be entered to proceed to the
next level.
The menu title will change to indicate the table id number that is being edited.
Option
1. Status
2. Network
3. Interface
4. Hops
5. Ticks
Enter option number, "=" - main menu, <TAB> - previous menu
>
NOTE: A Static Route will NOT be replaced with a RIP route, even if the hop and tick count is lower.
EDIT ROUTE MENU
Value Description
*[ ] - Is entry in static route table
[ ] - Destination network number
[ ] - Interface to destination network
[ ] - Hops to destination network
[ ] - Ticks to destination network
EDIT ROUTE 1 MENU
Value
*"Not Present" - Is entry in static route table
"1" - Destination network number
"" - Interface to destination network
[1] - Hops to destination network
[1] - Ticks to destination network
Description
191