Black Box 5000 series Reference Manual page 112

Menus Reference Manual: Edit Remote Site - CMCP Parameters Menu
CMCP (Connection Management) Parameters Menu
EDIT REMOTE SITE 1 PROTOCOL SET-UP CMCP PARAMETERS MENU
Option
1. IP spoofing
2. IPX spoofing
3. CMCP enabled
4. Bridge traffic
5. Disc after last
6. Suspension timeout
Enter option number, "=" - main menu, <TAB> - previous menu
>
The CONNECTION MANAGEMENT (CMCP) PARAMETERS MENU allows the configuration of the Connection
Management options for this remote site.
Note: this menu will only appear if this router has an ISDN BRI module installed.
1 - IP Spoofing
The IP Spoofing option directs you to the IP Spoofing Parameters Menu where the IP spoofing parameters for this
remote site are set. The parameters define how to interact and keep track of the TCP sessions while connection
management is enabled on the link to this remote site.
2 - IPX Spoofing
The IPX Spoofing option directs you to the IPX Spoofing Parameters Menu where the IPX spoofing parameters for
this remote site are set. The parameters define how to interact and keep track of the IPX sessions while connection
management is enabled on the link to this remote site.
3 - CMCP Enabled
The CMCP Enabled option enables or disables the Connection Management Control Protocol negotiations for this
remote site. When a connection to this remote site does not require connection management, this option may be
disabled causing CMCP not to be negotiated.
Connection Management is used to minimize the amount of connection time used when connected to partner routers.
When Connection Management is enabled, the active ISDN calls are monitored for "Interesting Traffic", suspended,
and resumed when required to transfer user data between routers.
Default: [disabled]
Considerations: if this remote site is set as spoofing, CMCP will be set to enabled.
Note: When CMCP is enabled, the call me prefix to get back to the partner router must be entered so that the link can
be re-established after suspension (only the directory number is passed when the call is set up, not the entire connection
number). For the same reason, the partner router must also have its call me prefix entered.
Value Description
menu - Configure IP spoofing
menu - Configure IPX spoofing
[disabled] - Enable CMCP negotiations
[enabled] - Spoof bridge traffic
[off] - Disconnect after last session
[off] - Set maximum suspension interval
112