Black Box 5000 series Reference Manual page 107

Menus Reference Manual: Edit Remote Site - IP Parameters - NAT Advanced Set-Up Menu
3 - Dynamic IP Pool
The Dynamic IP Address Pool option defines the block of global IP addresses that may be used to map to internal
addresses. The router will assign a global IP address from this pool to the internal address of a device on the network.
The first address in the range must be specified followed by the number of addresses in the pool.
4 - Add Static Entry
The Add Static Address option assigns a specific internal IP address of a device to a specific global IP address. When this
option is selected, first enter the internal IP address to be assigned, then the global IP address.
5 - Remove Static Address
The Remove static address option removes the static address assignment from the address pool. Addresses may be
removed individually by entering the global IP address to be taken off, or the entire list of static address assignments may
be cleared by entering "all".
107