Table of Contents
Advertisement
3 – LXT441 Remote Loopback Master
This option sets the LXT411 CSU/DSU link module in this device to master mode for loopback testing and displays
the results from traffic generated by the P1700 and looped back by the remote slave LXT CSU/DSU device.
Remote Loopback between two LXT CSU/DSU routers is only available in 56 K mode. The remote LXT CSU/DSU
must be put in slave mode manually.
Link Interface Type: LXT-CSU 56 Kbps
Sample Description :
Total Frames Xmt
Total Frames Rcv
Good
Frames Rcv
Error Frames Rcv
Type: [s] - redraw, [c]lear, [=] main menu, any other key to end.
Total Frames Xmt:
Total Frames Rcv:
Good Frames Rcv:
Error Frames Rcv:
Menus Reference Manual: WAN Loopback Menu
LINK 1 – LXT411 CSU/DSU REMOTE LOOPBACK MASTER
256 Byte Frame
:
723
:
723
:
431
:
The total number of frames transmitted by the link module.
The total number of frames received by the link module.
The total number of good frames received by the link module. A good frame is
a frame with a correct CRC, is correctly aligned, etc.
The total number of error frames received by the link module. An error frame is
a frame with a bad CRC, unaligned, contains an abort sequence, etc.
0
266
Advertisement
Table of Contents
