Table of Contents
Advertisement
Link Set-Up Menu – ISDN BRI
If the link has an ISDN BRI interface module and the logical ISDN type is ISDN, the menu will be:
Option
1. Physical link type
2. Link operation
3. Logical ISDN type
4. ISDN set-up
5. Group
Enter option number, "=" - main menu, <TAB> - previous menu
>
The LINK SET-UP MENU allows the configuration the link connections on this router . The options displayed for this menu
will vary depending on what interface modules are installed on this router.
1 - Physical link type
The Physical Link Type option displays the type of interface module installed for this link. This is a display-only item and
may not be changed.
Values: BRI
2 - Link Operation
The Link Operation option toggles between [enabled] and [disabled] to allow this link to be used for connections.
Default:
[enabled]
3 - Logical ISDN Type (if BRI module installed on this link)
The Logical ISDN Type option allows you to select between a switched (dial up) ISDN circuit or a digital leased circuit to
configure the router to match the type of service connected to this interface module.
The ISDN option is used when a switched (dial up) ISDN service is connected to the BRI module.
The Digital_Leased option is used when a permanent leased ISDN circuit is available from your ISDN service provider
and is connected to the BRI module; please see the Link Set-up menu on following pages for a description of this
option.
When this link is set to use digital leased circuits instead of switching circuits, the ISDN call establishing functions are
not displayed on the menu.
Default:
[ISDN]
Values: ISDN, Digital_Leased
Menus Reference Manual: Link Set-Up Menu
LINK SET-UP 1 MENU
Value
*"BRI"
[enabled]
[ISDN]
menu
[1]
Description
- Enable/disable link
- Configure ISDN operation
46
Advertisement
Table of Contents
