Table of Contents
Advertisement
Link Set-Up Menu – Digital Leased
If the link has an ISDN BRI interface module and the logical ISDN type is Digital_Leased, the menu will be:
Option
1. Physical link type
2. Link operation
3. Logical ISDN type
4. Frame Relay
5. Frame relay set-up
6. Phantom power detect
7. Link B channel
Enter option number, "=" - main menu, <TAB> - previous menu
>
The LINK SET-UP MENU configures the link connections on this P1700. The options displayed for this menu will vary
depending on what interface modules are installed in this router.
1 - Physical link type
The Physical Link Type option displays the type of interface module installed for this link. This is a display-only item and
may not be changed.
Values: BRI
2 - Link Operation
The Link Operation option toggles between [enabled] and [disabled] to allow this link to be used for connections.
Default:
[enabled]
3 - Logical ISDN Type (if BRI module installed on this link)
The Logical ISDN Type option allows you to select between a switched (dial up) ISDN circuit or a digital leased circuit to
configure the router to match the type of service connected to this interface module.
The ISDN option is used when a switched (dial up) ISDN service is connected to the BRI module; please see previous Link
Set-up Menu for a description of this option.
The Digital_Leased option is used when a permanent leased ISDN circuit is available from your ISDN service provider
and is connected to the BRI module. A digital leased circuit is permanently established by your service provider and
does not require ISDN phone numbers or dialing functionality. When a digital leased circuit is established, the P1700
will treat it as if it were a normal 64 Kbps leased line connection for each assigned B-channel.
When this link is set to use digital leased circuits instead of switching circuits, the ISDN call establishing functions are
not displayed on the menu.
Default:
[ISDN]
Values: ISDN, Digital_Leased
Menus Reference Manual: Link Set-Up Menu
LINK SET-UP 1 MENU
Value
*"BRI"
[enabled]
[Digital_Leased]
[enabled]
menu
[disabled]
*[B1]
Description
- Enable/disable link
- Enable/disable frame relay
- Configure Frame relay
- Detect phantom power
- Assign B channel
48
Advertisement
Table of Contents
