Black Box 5000 series Reference Manual page 144

4 - NetBIOS Node Type
The NetBIOS node type option allows you to set the type name resolution. The Send NetBIOS node type option must
be enabled before this option will be functional.
Default: disabled
Choices: B - broadcasts node names and queries
P - point-to-point communication with the NetBIOS name server to resolve and register NetBIOS
names.
M - mixed; a combination of B and P communication. Traffic is first broadcast on the local
segment and attached segments configured to propogate NetBIOS broadcasts. Once a
NetBIOS name server is located, point-to-point communication across routers is allowed.
H -hybrid; a mixture of B and P communications. P is used if a NetBIOS name server is available,
otherwise B is used.
5 - NetBIOS Scope Id
The NetBIOS scope Id option allows you to set the scope identifier. The default scope identifier will be the device
name followed be "_scope" (i.e. DEVXXX_scope). The Send NetBIOS scope option must be enabled before this
option will be functional.
Default: DEVXXX_scope
6 - NetBIOS Name Server
The NetBIOS name server option allows you to set the IP address of the NetBIOS name server. The Send NetBIOS
name srv option must be enabled before this option will be functional.
Default: none
Menus Reference Manual: NetBIOS Set-Up Menu
144