Table of Contents
Advertisement
Menus Reference Manual: Configure Edit Static IPX Service Menu
Edit Static IPX Service Menu
Option
1. Status
2. Server name
3. Service type
4. Interface
5. Network
6. Node
7. Socket
8. Hops
Enter:
entry id (from 1 to 50)
> 1
The above display is the first level of the EDIT SERVICE MENU. The table id number must be entered to proceed to the
next level.
The menu title will change to indicate the table id number that is being edited.
Option
1. Status
2. Server name
3. Service type
4. Interface
5. Network
6. Node
7. Socket
8. Hops
Enter option number, "=" - main menu, <TAB> - previous menu
>
NOTE: A Static Service will NOT be replaced with a SAP learned service, even if the hop count is lower.
EDIT SERVICE MENU
Value
Description
*[
]
- Is entry in static route table
[
]
- Novell server name
[
]
- Novell service type
[
]
- Interface to service
[
]
- Server's network number
[
]
- Server's node number
[
]
- Service's socket number
[
]
- Hops to server
EDIT SERVICE 1 MENU
Value
*"Not Present"
""
[1]
""
"1"
"00-00-00-00-00-01"
[0]
[1]
Description
- Is entry in static route table
- Novell server name
- Novell service type
- Interface to service
- Server's network number
- Server's node number
- Service's socket number
- Hops to server
195
Advertisement
Table of Contents
