Black Box 5000 series Reference Manual page 51

Link Set-Up Menu – Leased Line
If the link has a leased line module installed, the menu will be:
Option
1. Physical link type
2. Link operation
3. Frame Relay
4. Frame relay set-up
5. Link mode
5. Link speed
5. T1/E1 set-up
6. Link speed
7. Link CD wait time
8. Loop compensation
Enter option number, "=" - main menu, <TAB> - previous menu
>
The LINK SET-UP MENU allows the configuration the link connections on this P1700. The options displayed for this
menu will vary depending on what interface modules are installed on this router.
1 - Physical link type
The Physical Link Type option displays the type of interface module installed for this link. This is a display-only item and
may not be changed.
Values: V.35, RS232, RS530, V.11, G.703, LXT441-CSU, ATL-CSU, T1/E1
2 - Link Operation
The Link Operation option toggles between [enabled] and [disabled] to allow this link to be used for connections.
Default: [enabled]
3 – Frame Relay (if a V.35, RS232, RS530, V.11, G.703, T1/E1, LXT441-CSU or ATL-CSU module is installed on this
link)
The Frame Relay option toggles circuit operation between frame relay and PPP leased to configure the router to match
the type of service connected to this interface module. When this operation is selected, the router will request
confirmation of the change; enter "yes" to confirm.
When this link is set to use Leased instead of Frame Relay, the Frame Relay connection establishing functions are not
displayed on the menu.
Default: If International software loaded: [disabled] – circuit is in leased line mode.
If North American software loaded: [enabled]- circuit is in Frame Relay mode.
Values: FrameRelay, Leased
Considerations:
The state of the Logical Leased type option is saved when performing a software upgrade. This means that when the
P1700 restarts, it will return to the operation state that was enabled before the upgrade was performed.
Menus Reference Manual: ISDN Set-Up Menu
LINK SET-UP 1 MENU
Value
*"Universal"
[enabled]
[enabled]
menu
[64 kbps]
menu
[64 kbps]
[60 sec]
[disabled]
Description
- Enable/disable link
- Configure Frame relay
- Set speed for link
- T1/E1 link set-up
- Set speed for link
- Set CD wait time for link
- Enable/disable delay compensation
51