Wan Set-Up Menu - Black Box 5000 series Reference Manual

WAN Set-Up Menu

Option
1. Switch type
2. Group set-up
3. Link set-up
4. Remote site set-up
5. Security set-up
6. PPP set-up
7. IP address connect
8. Force disconnect
9. Link status summary
Enter option number, "=" - main menu, <TAB> - previous menu
>
The WAN SET-UP MENU allows the definition of link operation for the router.
1 - Switch Type
Choosing the Switch Type option defines the ISDN switch (signaling) type that this router is connected to.
When the Switch Type is changed, a Soft Reset must be performed for this to take effect. This allows the router to
initiate operation with the new switch type.
Default: If S/T module is installed: [NET3]
If U module is installed: [NI-1]
Choices: DMS-100, NI-1, NI-2, 5ESS-PP, 5ESS-MP, NET3, TPH1962, KDD, SWEDEN, and NTT
Considerations:
The 5ESS switch types are split into two versions: 5ESS-PP (point to point) and 5ESS-MP (multipoint). In ISDN,
point to point means that both B channel links in an ISDN BRI are used for a connection between two devices.
Multipoint means that one link of the BRI may be used to connect to one device, the other link may be used to
connect to a different device.
Note: this menu item appears only if at least one ISDN module is installed in this router.
2 - Group set-up
The group Set-up option takes you to the Group Set-up Menu, where ISDN hunt group parameters may be configured.
Note: this option appears only if the router has at least one ISDN U BRI or at least two ISDN S/T BRI modules installed
and the Logical ISDN Type set to ISDN.
Menus Reference Manual: WAN Set-Up Menu
WAN SET-UP MENU
Value
[NI-1]
menu
menu
menu
menu
menu
menu
Description
- Set switch type
- Configure group operation
- Configure link parameters
- Configure remote site access
- Configure security
- Configure PPP parameters
- Configure IP address connect
- Disconnect a link
- Status summary of all links
39