Black Box 5000 series Reference Manual page 37

5000 series bridge/router ppp menu reference manual
Hide thumbs Also See for 5000 series:
Table of Contents

Advertisement

3 - Show Address Pool
This option displays the IP address pool for this remote site.
Pool Address
--------------
12.34.5.6
12.34.5.12
23.45.6.10
23.45.6.11
23.45.6.12
23.45.6.13
The Pool Address is the internal address to be used on this network, the Actual Address is the global IP address to which
the internal address is assigned.
When the last dynamically assigned address in the address pool is reached, the router will automatically use port
translation with that address in order to allow as many connections as possible. If there are zero or one address specified
for the pool, then port translation will be used for all connections. If zero, the address assigned by the remote router
IPCP or the address specified in the "Peer IP address" option will be used. If one address is specified, that address will be
used.
4 - Add Static Entry
The Add Static Address option assigns a specific internal IP address of a device to a specific global IP address. When this
option is selected, first enter the internal IP address to be assigned then the global IP address.
5 - Remove Static Address
The Remove Static Address option removes the static address assignment from the address pool. Addresses may be
removed individually by entering the global IP address to be taken off, or the entire list of static address assignments may
be cleared by entering "all".
6 - NAT Enabled
The NAT enable option enables or disables Network Address Translation on the LAN.
When NAT is enabled this router will not send RIP messages out. The router will be able to receive RIP requests. IP
pattern filters and Firewall use the non-translated IP address. (i.e. the private IP address that is used on the private
network).
Default:
[disabled]
Menus Reference Manual: LAN – NAT Menu
NAT ADDRESS POOL
Type
Actual Address
-----
---------------
Static
196.23.45.6
Static
196.23.45.24
Dynamic 123.45.67.8
Dynamic None assigned
Dynamic None assigned
Dynamic None assigned
37
Status
---------
In use
Reserved
In use
Available
Available
Available

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lr5100a-tLr5200a-r2

Table of Contents