Ipx Routing Set-Up Menu - Black Box 5000 series Reference Manual

Menus Reference Manual: IPX Routing Set-Up Menu

IPX Routing Set-Up Menu

Option
1. Static routes
2. Static services
3. IPX routing
4. IPX forwarding
5. Local networks
6. Show routes
7. Show services
8. Help
Enter option number, "=" - main menu, <TAB> - previous menu
>
The IPX ROUTING SET-UP MENU allows the display and configuration of the IPX Routing parameters for the router.
1 - Static Routes
The Static Routes option directs you to the Static Routes Menu, where user defined IPX static routes are maintained.
2 - Static Services
The Static Services option directs you to the Static Services Menu, where user defined IPX static services are maintained.
3 - IPX Routing
The IPX Routing option enables or disables the IPX routing.
Default: [enabled]
Considerations:
Routing information (RIP) will only be transmitted across the WAN to the partner router according to the state of
the IPX DMR Enabled option within the IPX Parameters menu of the remote site profile used to establish a PPP
connection. If demand RIP is enabled, RIP messages will only be transmitted when there is a change.
When IPX Routing is disabled, all learned RIP routes will be cleared from the routing table.
IPX ROUTING SET-UP MENU
Value Description
menu - Edit/display static routes
menu - Edit/display static services
[enabled] - Enable/disable IPX router
[enabled] - Enable/disable IPX routing
- Display local network connections.
- Display the route table
- Display the service table
- Description of IPX routing
186