Black Box 5000 series Reference Manual page 232

Menus Reference Manual: Remote Site Information Menu
3/4 - Status
Status of a remote site connection is displayed on a series of screens. To navigate from one display to another, enter "n" to go
to the next screen, "p" to go to the previous screen, "s" to go to the starting screen or any other key to return to the Remote
Site Stats Menu. Note: the"n", "p" or "s" are case sensative; they must be lower case.The display will vary depending on the
type of connection to the selected remote site; the status of more than one protocol option may be displayed on a screen.
Status – ISDN Link
* - Up
FR AC MP
--- -- --
D D E
Status – Leased Line
* - Up
FR AC MP
--- -- --
D D E
Protocol Status – Frame Relay
* - Up
FR AC MP
--- -- --
PPP D E
FR : Frame Relay PPP, Raw 1490 or disabled for this remote site.
AC : Auto-call enabled / disabled for this remote site.
MP : Multipoint enabled / disabled for this remote site.
Pri/Sec : The Primary and Secondary (if applicable) links for this remote site.
BCP : Bridge Control Protocol enabled / disabled status.
Protocols Configurations
Remote Site Name: test_ISDN (Id: 1)
E - Enabled D - Disabled
Pri/Sec DLCI
------------- ----
Link04/none NA
Protocols Configurations
Remote Site Name: test_LEASED (Id: 2)
E - Enabled D - Disabled
Pri/Sec DLCI
------------- ----
Link04/none NA
Protocols Configurations
Remote Site Name: test_FRELAY (Id: 3)
E - Enabled D - Disabled
Pri/Sec DLCI
------------- ----
none/none 16
NA - Not Available
BCP IPCP IPXCP CCP
--- ---- ----- ---
E E E E
NA - Not Available
BCP IPCP IPXCP CCP
--- ---- ----- ---
E E E E
NA - Not Available
BCP IPCP IPXCP CCP
--- ---- ----- ---
E E E E
232
BACP CMCP
---- ----
E E
BACP CMCP
---- ----
NA NA
BACP CMCP
---- ----
NA NA