Table of Contents
Advertisement
Menus Reference Manual: IPX Routing Set-Up Menu
4 - IPX Forwarding
The IPX Forwarding option enables or disables the forwarding of IPX traffic. When the IPX forwarding option is
disabled, IPX traffic across the WAN links will be blocked
Default:
[enabled]
Considerations:
When IPX Forwarding is disabled all learned RIP routes will be cleared from the routing table.
5 - Local Networks
The Local Networks option displays all of the IPX network numbers currently in use by the router on each of its
interfaces.
LAN Interface:
Ethernet II
Raw 802.3
IEEE 802.2
802.2 Snap
WAN Interface:
SITE2
6 - Show Routes
The Show Routes option displays all of the learned IPX routes currently in use by the router.
There is a maximum of 512 route entries allowed in the table.
Total entries : 7
Network
Interface
---------------------------------------------------------
51524
local
126
lan
14526
SITE2
Network:
IPX Network Address of the remote network.
Interface:
Interface that the IPX network is located on; either local, LAN or remote site router.
Next Hop:
IPX address of the next-hop router to use to reach the Destination IPX Network.
Hops:
Number of hops to reach the Destination IPX Network.
Ticks:
Number of ticks to reach the Destination IPX Network.
Considerations:
A 9600-bps link on this router has a tick value of 5.
LOCAL IPX NETWORKS
51524
0
0
0
14526
IPX Routes
Next Hop
local
205204239749
992400423941
Hops
Ticks
0
1
2
50
2
50
187
Advertisement
Table of Contents
