Black Box 5000 series Reference Manual page 66

When displaying status or statistic information on the connections to a remote site PPP router, most of the information is
displayed according to a particular remote site. Within the Statistics section, a remote site is chosen and then the information
for that connection may be displayed. The name of the remote site that the connection has been attached to may be viewed
in the Event log file available within the Network Events menu.
There are 128 configurable remote sites available. Each of these remote sites will have a remote site alias associated with them. When a connection is made to a particular
remote site, the call will be attached to that remote site profile after the connection has been established. Statistics for a connection are stored under the remote site profile
alias or ID number.
Three remote site profiles, numbered 129 through 131, are reserved as templates that may be used for faster remote site
configuration.
Remote Site ID Remote Site Alias
1 - 128 (user configurable)
129 ISDN_TEMPLATE
130 FR_TEMPLATE
131 LEASED_TEMPLATE
Menus Reference Manual: Remote Site Set-Up Menu
Description
Remote site used for outgoing connections to these specific remote sites.
Configuration parameters for the outgoing connection are taken completely from
the parameters defined in the remote site profile.
Remote site profile used for incoming connections that have been authenticated
and the incoming user name matches the name of one of the configured remote
sites.
Remote site profile used to set up a template that may be used to configure remote
sites with ISDN connections. Multilink state is taken from this profile. If the
incoming user name matches the name of one of the configured remote sites, the
remaining call parameters will be negotiated from the values defined for that
remote site.
If the incoming user name does not match any of the remote sites defined, the
connection is attached to the INCOMING profile for that link (132 through 145).
The remaining negotiating parameters, such as BCP, IPCP, IPXCP, and CCP, will
be taken from the ISDN_TEMPLATE settings.
Remote site profile used to set up a template that may be used to configure remote
sites with Frame Relay connections. If autolearning is enabled, this template will be
used to auto-create each site learned. Site id numbers are assigned sequentially
starting from the first available site number in the remote site table.
Remote site profile used to set up a template that may be used to configure remote
sites with Leased Line connections.
For incoming connections, a remote site profile is auto-created at the first available
location in the remote site table.
66