Table of Contents
Advertisement
NAT Exports Menu
Option
1. Edit Services
2. Router port
3. Show services
4. Clear services
Enter option number, "=" - main menu, <TAB> - previous menu
>
The NAT Exports Menu has options for setting, clearing and reviewing exported Internet services available on this network.
Using Network Address Translation (NAT). NAT maps arbitrary internal network IP addresses to valid global IP addresses
used on the Internet. Network Address Port Translation (NAPT) allows a number of internal hosts to map to the same global
IP address via port assignment to that address. NAT exported services are only available through port translation.
NOTE: Exported services from a remote site are only available if NAPT is enabled for that site (under the
Configuration/WAN Set-up/Remote Site Set-up/Edit Remote Site/Protocol Set-up/IP Parameters menu).
1 - EDIT Services
The Edit Services option takes you to the Edit Services Menu, where the host devices for the various Internet services
that will be offered on this network may be added to or removed from the export services table.
2 - Router Port
The Router Port option takes you to the Router Port Menu where the port number for services provided by this router
may be assigned.
3 - Show Services
Displays a list if the Internet services available for export on this network.
4 - Clear Services
Clears the NAPT table of IP addresses of services available for export on this network.
Menus Reference Manual: NAT Exports Menu
NAT EXPORTS MENU
Value
menu
menu
Description
- Add/remove exported services
- Change router server ports for export
- Display exported services
- Clear all exported services
157
Advertisement
Table of Contents
