Table of Contents
Advertisement
T1/E1 Set-Up Menu
Option
1. Link mode
2. LBO
3. Channel rate
4. T1 framing
5. Slot/channel set-up
6. Line encoding
7. Clocking
8. Alarm generation
9. T1.403 PRM
Enter option number, "=" - main menu, <TAB> - previous menu
>
Option
1. Link mode
2. LBO
3. E1 framing
4. Speed
5. E1 CRC4
6. Slot/channel set-up
7. Line encoding
8. Clocking
9. Alarm generation
Enter option number, "=" - main menu, <TAB> - previous menu
>
The T1/E1 SET-UP MENU allows the configuration the T1/E1 link connections on this P1700. Because the options
displayed for this menu will vary depending whether the link is operating in T1 or in E1 mode, both displays are shown above.
1 – Link Mode
The Link Mode option sets the router to operate as a T1 or an E1 carrier service interface.
Default:
North America: [T1]
International: [E1]
Menus Reference Manual: T1/E1 Set-Up Menu
T1/E1 SET-UP MENU
Value
[T1]
[L0db]
[64K]
[ESF]
menu
[B8ZS]
[network]
[enabled]
[enabled]
T1/E1 SET-UP MENU
Value
[E1]
*[120_Ohm]
[Framed]
[64K]
[enabled]
menu
[HDB3]
[network]
[enabled]
Description
- Set link mode
- Set line build out
- Set link operation
- T1 framing format
- Link slot set-up
- Set line encoding
- Set clock source
- Send remote frame alarm
- T1.403 performance report
Description
- Set link mode
- Set line build out
- E1 framing format
- Set link operation
- Enable/disable E1 CRC4
- Link slot set-up
- Set line encoding
- Set clock source
- Send remote frame alarm
59
Advertisement
Table of Contents
