Black Box 5000 series Reference Manual page 100

5000 series bridge/router ppp menu reference manual
Hide thumbs Also See for 5000 series:
Table of Contents

Advertisement

Menus Reference Manual: Edit Remote Site - IP Parameters Menu
IP Parameters Menu
EDIT REMOTE SITE 1 PROTOCOL SET-UP IP PARAMETERS MENU
Option
1. IP routing
2. NAT advanced setup
3. IP enabled
4. NAT enabled
5. Link IP type
6. Local IP address
7. Peer IP address
8. Private route
9. VJ compression
Enter option number, "=" - main menu, <TAB> - previous menu
>
The IP PARAMETERS MENU allows the setting of the type of IP link connection to the remote site PPP router. The
parameters defined here are used by the IPCP (Internet Protocol Control Protocol) functions of the router for negotiating IP
routing during call establishment. The menu options are shown in the above screen for both the numbered and unnumbered
link IP type settings. Some of the above menu options will not be displayed when unnumbered link IP type is enabled.
Each side of the connection must have an IP address assigned to the router in order to properly route IP packets between the
two routers.
The IP routing parameters defined here are for this connection to the remote site peer IP router only. The IP routing performed
on the local LAN is defined within the IP Routing menu under the Configuration menu. This allows the IP routing to be set
independently for each interface on this router.
1 - IP Routing
The IP Routing option directs you to the IP Routing Parameters Menu where the IP routing parameters for this remote
site are set. The parameters include the type of IP routing, the use of triggered RIP, and others.
2 – NAT Advanced Setup
The NAT Advanced Setup option takes you to NAT Advanced Setup menu where parameters for the Network Address
Translation pool for this remote site may be assigned.
Value
menu
menu
[enabled]
[disabled]
[numbered]
[none]
[none]
[disabled]
[disabled]
100
Description
- Configure IP routing
- Configure NAT address pool
- Enable IP protocol
- Enable address translation
- Define numbered link
- Define local IP address
- Define peer IP address
- Do not advertise this route
- Enable VJ header compression

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lr5100a-tLr5200a-r2

Table of Contents