Table of Contents
Advertisement
Menus Reference Manual: Edit Remote Site Menu – Connection Set-Up Menu
E – Single link connection, primary link set to Frame Relay.
Option
1. Primary link
2. DLCI
3. CIR
4. EIR
5. Time interval
6. PPP
7. State
Enter option number, "=" - main menu, <TAB> - previous menu
>
This version of the REMOTE SITE CONNECTION SET-UP MENU allows the setting of frame relay parameters used
to configure the Permanent Virtual Circuit (PVC) that is used to connect to this remote site. Up to 128 remote site PVCs may
be defined.
1 - Primary Link
The Primary link option defines the primary link number that will be used to connect to this remote site.
Options: 1, 2, none
Default:
[none]
Considerations:
The PVC must be toggled (disable – enable option 7. State) before this option may be takes effect.
2 - DLCI
The Data Link Connection Identifier (DLCI) option specifies the Frame Relay LAPF address for the PVC. This value
must be set to be the same as the value provided by the Frame Relay network provider.
When the frame relay router first starts up it will query the frame relay service to try to determine the LMI type. Once
the LMI type is determined, the PVC configurations will be known from the full status enquiry messages. If the DLCI
numbers of the PVC's on your service are determined during startup, the P1700 will automatically create a remote site
profile for each PVC. The automatically created remote site profiles will be named "LinkxDLCIyyy" where x is the
physical link number the PVC is on and yyy is the DLCI of the PVC.
Default:
[16]
Range:
16 to 991
Considerations:
The PVC must be toggled (disable – enable option 7. State) before this option may be takes effect.
REMOTE SITE n CONNECTION SET-UP MENU
Value
[7]
- Configure primary link number
[16]
- Frame relay address
[0 Kbps]
- Committed information rate
[link_speed]
- Excess information rate
[10 (1/10th s)]
- Interval for monitoring bandwidth
[disabled]
- Enable/disable PPP over Frame Relay
[disabled]
- Enable/disable PVC
Description
77
Advertisement
Table of Contents
