Black Box 5000 series Reference Manual page 10

5 - Console
The Console option takes you to the Console Menu, where the present configuration may be dumped to the console
computer for storage or a stored configuration uploaded from the console computer.
6 - Hardware Status
The Hardware Status option displays the status of the router hardware.
Boot Code version
Boot Code revision
RAM size
MAC check code
LAN interface type
LAN2 interface type
Module types
CPU type
CPU speed
Compression
Boot Code version
Boot Code revision
System Code revision The system code software revision number currently installed in this router.
Service Reference
MAC Address
MAC Check Code
RAM size
ROM size
Menus Reference Manual: Access Set-Up Menu
Hardware Status
: 51B1.4.1.4
: 0
: 8 MB
: b9876d23
: 10BaseT
: 10BaseT,
: ( 1) BRI ST
: 68EH360
: 25 Mhz
: enabled
The software boot code version currently installed in this router. This is the
number that is displayed in the upper right of the menu screens when in console
load mode.
The software boot code revision number currently installed in this router. A
control number for tracking minor software revisions.
Internal factory reference number.
The MAC Address of the LAN port for this router.
Check code used for feature upgrades.
The amount of RAM in this router.
Indicates the size of the FLASH EEPROM installed.
System Code revision : 7a0
Service reference
ROM size
MAC address
MAC address
( 2) BRI ST
10
: 0/0
: 2 MB
: 02-03-04-05-06-07
: 02-03-04-05-06-07