Black Box 5000 series Reference Manual page 132

Menus Reference Manual: Applications Set-Up Menu
Applications Set-Up Menu
Option
1. SNMP set-up
2. DHCP set-up
3. Firewall set-up
4. NAT exports
5. Syslog set-up
6. Time to live
7. Traceroute
8. Ping
Enter option number, "=" - main menu, <TAB> - previous menu
>
The APPLICATIONS SET-UP MENU provides paths to menus for Internet communication management applications.
1 - SNMP Set-Up
The SNMP Set-up option takes you to the SNMP Set-Up Menu, where you to define the parameters necessary to allow
the router's SNMP agent and corresponding MIB information to be accessed by an SNMP Network Management
Station. Traps (Alarms) will also be sent by the router to the NMS to inform it of a significant event (cold start, warm
start, link up, link down, and authentication failure).
2 - DHCP Set-Up
The DHCP Set-up option directs you to the DHCP Set-Up Menu, where the DHCP (Dynamic Host Configuration
Protocol) parameters may be set and the IP address pool may be viewed.
3 - Firewall Set-Up
The Firewall Set-up option directs you to the Firewall Set-Up Menu, where the IP Firewall parameters may be set.
4 - NAT Exports
The NAT Exports option directs you to the NAT Exports Menu, where Internet services available for export on this
network may be set up, checked, or removed.
5. Syslog Set-Up
The Syslog Set-up option directs you to the Syslog Set-up Menu, where a system message logging service to forward event
messages to servers using the Syslog utility may be set up.
APPLICATIONS SET-UP MENU
Value Description
menu - Define SNMP communications
menu - Define DHCP configuration
menu - Define firewall parameters
menu - Define exported services for NAT
menu - Define Syslog configuration
[32] - Router hops allowed
- ICMP echo requests
132