Black Box 5000 series Reference Manual page 214

State: Enabled, Up, Network, Opened
Remote Site: Atlanta
Interface State
Speed : 64000 bps
Type : XXX
XXXXXXX
XXXXXXX
XXXXXXX
XXXXXXX
XXXXXXX
Rcv 0%
Xmt 0%
State :
This displays the current state of the link: Enabled/Disabled, Idle / Opening / Up/ Down / Establish /
Authenticate / Network / Terminate, Initial / Starting / Closed / Stopped / Closing / Stopping / Req Sent / Ack
Rcvd / Ack Sent / Opened.
Remote Site :
This displays the name of the current remote site to which this link is connected.
Speed :
This displays the speed at which the link is operating. The speed will be as set by the connection. If the link is
disconnected, no speed (0) will be shown.
Type :
The interface type is identified in this display.
Frame Counts
Bytes :
This indicates the total number of bytes received/transmitted across the link.
Frames :
This indicates the total number of frames received/transmitted across the link.
Frame Errors
These frames are considered invalid because they do not conform to valid frame checking parameters. These frames
usually result from a hardware error on either the LAN or the router.
Cgt Disc Congestion Discards — This is generated when a frame is discarded due to congestion.
Menus Reference Manual: Statistics Menu
Link
Frame Counts
Bytes :
Frames:
Throughput
0.0 KB |
0.0 KB |
|----|----|----|----|----|----|----|----|----|----|
0 10 20
1 Status
(Rcv/Xmt) Frame Errors
47648/47639 Cgt disc
3536/3536 CRC
Rcv abort
Overrun
Rcv miss
Too large
Misaligned : 0
Underrun
30 40 50 60
214
: 0
: 0
: 0
: 0
: 0
: 0
: 0
70 80 90 100%