Black Box 5000 series Reference Manual page 114

Menus Reference Manual: Edit Remote Site - CMCP Parameters - IP Spoofing Menu
IP Spoofing Menu
EDIT REMOTE SITE 1 PROTOCOL SET-UP CMCP PARAMETERS IP SPOOFING MENU
Option
1. TCP idle
2. TCP interval
3. TCP retries
4. TCP aging
Enter option number, "=" - main menu, <TAB> - previous menu
>
The IP SPOOFING PARAMETERS MENU allows the setting of connection management parameters that control the IP
spoofing portion of the link connection. The timers and values defined within this menu will be used for each of the TCP
sessions monitored by this P1700.
1 - TCP Idle
The TCP Idle option defines the idle time in seconds that the P1700 will wait before sending the first fake (spoofed)
keepalive to the TCP session endpoint. Idle time is the time when the P1700 does not receive TCP keepalive messages
for that TCP session.
When the TCP Idle option is set to off, the P1700 will never send out fake keepalive messages.
The TCP keepalive messages are used to determine if the station at the end of the TCP session is still alive.
Default: [3600 sec]
Enter :
time in seconds (from 60 to 7200), off
>
2 - TCP Interval
The TCP Interval option defines the internal interval time in seconds that the P1700 will wait before sending the next
TCP keepalive. These additional keepalive messages will be sent when there has not been a response to the initial
keepalive messages sent from the P1700.
The TCP keepalive messages are used to determine if the station at the end of the TCP session is still alive.
Default: [60 sec]
Enter :
time in seconds (from 5 to 120)
>
Value Description
[3600 sec] - Set interval till first TCP keepalive
[60 sec] - Set interval between TCP keepalives
[5] - Set maximum TCP keepalive retries
[7200 sec] - Set TCP connection aging interval
114