Table of Contents
Advertisement
Menus Reference Manual: Edit Remote Site - Connection Set-Up - ISDN Call - Advanced Settings Menu
Advanced Settings Menu
EDIT REMOTE SITE 1 CONNECTION SET-UP ISDN CALL SET-UP ADVANCED SETTINGS MENU
Option
1. Callback delay
2. Redial timer
3. Redial count
1 – Callback Delay
The Callback Delay option specifies the number of seconds that this router will wait before making a call in response to a
callback request call from the remote site router. This allows sufficient time for the originating call to complete its
disconnect before the response call arrives.
Default:
[2 sec]
Range:
1 to 20 seconds
2 - Redial Timer
The Redial Timer option specifies the time the router will wait before attempting to redial an incomplete ISDN call.
Default:
[10 sec]
Range:
4 to 255 seconds
Considerations:
When the ISDN switch type is set to KDD or NTT, the default, and minimum redial timer value is 90 seconds.
3 - Redial Count
The Redial Count option specifies the number of times the router will attempt to redial an incomplete ISDN call.
Default:
[5] redials
Range:
0 to 255 redials
Value
Description
[2 s]
- Time to wait until callback
[10 s]
- Time to wait until redial
[5]
- Number of redials to try
86
Advertisement
Table of Contents
