Table of Contents
Advertisement
Menus Reference Manual: Edit Remote Site Menu – Connection Set-Up Menu
After the remote site id or alias is supplied, the next level menu specific to that site appears
Option
1. Connection set-up
2. Activation set-up
3. Protocol set-up
4. Security parameters
5. Remote site alias
6. Connection
7. Primary connection
8. Secondary connection
9. Remote site type
Enter option number, "=" - main menu, <TAB> - previous menu
>
1 - Connection Set-Up
The Connection Set-up option takes you to the Connection Set-Up Menu for the chosen remote site. Here you define
the connection parameters that will be used to establish the connection to the remote site device.
2 - Activation Set-Up
The Activation Set-up option takes you to the Activation Set-up menu for the chosen remote site, where activation
conditions are defined for the main connection to this remote site. The activation conditions for the primary
connection consist of the activation schedule, which determines when the connection may be operational, the usage
limits and the load thresholds at which the link will be brought up or down.
The Activation conditions are not applicable when placing a manual call to this remote site.
Note: This option does not appear for site profiles with a Frame Relay, PPP disabled connection.
2/3 - Protocol Set-Up
The Protocol Set-up option takes you to the Protocol Set-up menu for the chosen remote site, where the BCP, IPCP,
IPXCP, CCP, CMCP and BACP protocol parameters are configured.
EDIT REMOTE SITE
Value
menu
menu
menu
menu
"LEASED1"
[dual_link]
[Leased]
[Leased]
*[interoperable]
70
MENU
Description
- Configure connections
- Configure remote site activation
- Configure protocols
- Configure security parameters
- Alias of remote site entry
- Select connection configuration
- Select connection type
- Select connection type
- Interoperable or spoofing
Advertisement
Table of Contents
