Table of Contents
Advertisement
Menus Reference Manual: Edit Remote Site Menu – Connection Set-Up Menu
6/7 – Primary connection
The Primary connection option defines what type of service will be used on the primary connection. If the currently
selected primary link is not configured for the chosen connection type, a warning is displayed: the connection will not be
established if the link is not configured for the chosen connection type.
Options: Frame_relay, Leased, ISDN_call
7/8 – Secondary Connection
The Secondary connection option defines what type of service will be used on the secondary connection. If the currently
selected secondary link is not configured correctly for the chosen connection type, a warning is displayed. The primary
connection will still be established even if the secondary connection is not correctly configured.
Options: Frame_relay, Leased, ISDN_call
Note: this option is user configurable only if the connection is not single link. If the connection is single link, the option
becomes display only with *[none] displayed.
8/9 - Remote Site Type
The Remote Site Type option defines whether spoofing is enabled or not with this remote site connection.
Options: interoperable, spoofing
Note: this option is user configurable only if the primary connection is ISDN_call type, otherwise this option is display
only.
Considerations: If you are running spoofing with Triggered RIP, both routers must be set to Triggered RIP
"link_up_only". The P1700 will automatically configure to this setting but the remote partner router
should be checked to make certain that it is correctly configured.
72
Advertisement
Table of Contents
