Table of Contents
Advertisement
Menus Reference Manual: Remote Site Information Menu
Protocol Configurations – BCP
Status
802.3/Ethernet
Tinygram Compression :
MAC Address
802.3/Ethernet:
This displays the resulting bridging state for this protocol after the advisory notices are sent by the local and remote
bridges. The advisory notices indicate what frame types are supported by the device.
This may display disabled if the partner bridge sends a configure reject for the advisory notice for this frame type.
When this happens, the device that originally sent the advisory notice will continue to send bridge frames in the frame
formats originally reported in the advisory notice.
Tinygram Compression:
This displays the negotiated state of Tinygram Compression for the local and remote devices.
MAC Address:
This displays the MAC addresses of the local and remote devices which are used for bridging data between the
devices.
Protocol Status – BACP
Status
Magic Number
Call Mode
Request number Option:
Magic Number:
This displays the control code numbers passed between the two routers. The router with the lower magic number will
have control of setting up and tearing down the connection.
Call Mode:
This displays the selected origination of the secondary call to this remote site.
Request number Option:
The status of the Request number option for obtaining the ISDN number of the partner router.
Local
BCP
:
disabled
disabled
:
00-00-00-00-00-00
Local
BACP
:
1850971031
:
Partner
disabled
234
Remote
disabled
disabled
00-00-00-00-00-00
Remote
1851377123
Advertisement
Table of Contents
