Black Box 5000 series Reference Manual page 154

Edit Firewall Entry Menu
Option
1. Dest IP address
2. Destination mask
3. Source IP address
4. Source mask
5. Protocol type
6. Source port
7. Destination port
8. Description
Enter :
Firewall filter id (from 1 to 128)
> 1
The above display is the first level of the EDIT FIREWALL ENTRY MENU. Once the firewall entry index number is
entered, the number specified is added to the menu title bar and the Options are as shown below:
Option
1. Dest IP address
2. Destination mask
3. Source IP address
4. Source mask
5. Protocol type
6. Source port
7. Destination port
8. Description
9. Entry direction
Enter option number, "=" - main menu, <TAB> - previous menu
>
A Firewall entry allows the creation of a specific IP connection type of communication path to be allowed through the firewall.
The Source IP address of a known network may be defined to be allowed to access either a specific device or network.
Menus Reference Manual: Edit Firewall Entry Menu
EDIT FIREWALL ENTRY MENU
Value
[
[
[
[
[
[
[
[
EDIT FIREWALL ENTRY 1 MENU
Value
[none]
[none]
[all]
[none]
[TCP]
[0] [65535]
[0] [65535]
manual entry
[outbound]
Description
] - Incoming IP destination address
] - Destination subnet mask
] - Incoming IP source address
] - Source subnet mask
] - Allow specific protocol types
] - Source port range to allow
] - Destination port range to allow.
] - describe the entry
Description
- Incoming IP destination address
- Destination subnet mask
- Incoming IP source address
- Source subnet mask
- Allow specific protocol types
- Source port range to allow
- Destination port range to allow.
- describe the entry
- Direction this entry applies to
154