Table of Contents
Advertisement
Menus Reference Manual: Edit Secondary Entry Menu
Edit Secondary Entry Menu
Option
1. Secondary IP
2. Mask size
3. Subnet mask
4. Routing protocol
5. RIP mode
6. Private route
7. Route cost
Enter :
Set the entry ID (from 1 to 16)
>
The Edit Secondary Entry Menu provides options for entering parameters for routing to secondary networks or subnetworks
through this router.
When an ID number for a secondary network is entered for the first time, you will be prompted to enter the defining IP
address and mask size for the network. Once the secondary network is defined, the IP address and mask cannot be edited
with this menu; the entry must be removed and re-entered to change these parameters.
1 - Secondary IP
The Secondary IP Address for this router on the secondary network or subnet with the new ID number is entered here
the first time the ID number for this secondary network is entered.
The secondary IP address is used to access the secondary subnet or network through this router.
The IP address consists of 4 eight-bit fields separated by periods ("."), where each field is specified by a decimal number
(e.g. 92.3.1.10). Each decimal number must be less than or equal to 255 (the maximum value of an 8-bit binary number).
* Display only. This address is set when the entry is defined for the first time and may not be changed here; to make a
change, the entry must be removed from the secondary address table and re-entered.
2 - Mask Size
The Mask Size defines the number of contiguous bit locations from the start of the IP address to be used for the subnet
mask for this secondary network. The Subnet Mask when applied to the secondary IP address defines this Secondary IP
subnet or network.
* Display only. This number is set when the entry is defined for the first time and may not be changed here; to make a
change, the entry must be removed from the secondary address table and re-entered.
EDIT SECONDARY ENTRY MENU
Value
Description
*[
]
- Secondary IP address
*[
]
- Secondary subnet mask size
*[
]
- Secondary subnet mask
[
]
- Define routing protocol
[
]
- Define RIP send/receive mode
[
]
- Do not advertise this route
[
]
- Cost added to learned routes
33
Advertisement
Table of Contents
