Table of Contents
Advertisement
CHAPTER 6: Broadband Manager
Figure 6-2. General Settings screen.
6.1.1 LAN E
S
THERNET
EGMENT
Server IP Address: This IP address is the internal LAN IP address of the Router.
The address entered into the Setup Wizard is displayed here (for example,
192.168.2.1).
Server IP Netmask: The Router subnet mask generally can be left at the default
value of 255.255.255.0.
6.1.2 WAN E
S
THERNET
EGMENT
Select NAT (Network Address Translation) to provide firewall protection and
enable all local LAN users to share one IP address to access the Internet. If the
NAT box is not checked, the WAN Ethernet is configured as a router to route
network traffic between the LAN Ethernet segment and the WAN Ethernet
segment. The External Port IP Addresses are provided by your ISP or remote
system administrator.
PPPoE: If your ISP uses Point-to-Point Protocol over Ethernet for authentication
purposes, select the PPPoE box and enter your ISP account User Name and
Password in the fields provided.
51
Advertisement
Table of Contents
