Table of Contents
Advertisement
8.3.1 A
D
DDING THE
Windows 95/98:
1. Click Start, Settings, Control Panel.
2. Double-click the Network icon to open the Network dialog box.
3. Click Add. The Select Network Component Type dialog box opens.
4. Select Adapter, then click Add. The Select Network adapters dialog box
opens.
5. In the Manufacturers box, select Microsoft. In the Network Adapters box
select Dial-Up Adapter.
6. Click OK (twice) to return to, and then close, the Network dialog box.
Windows NT:
Dial-up Networking adds PPP and SLIP protocol support, enabling your
workstation to gain access to a remote computer or network, even if your computer
is not on a network.
1. Double-click My Computer, then double-click Dial-Up Networking. The
following screen is displayed:
2. Click Install, then follow the onscreen instructions to configure your
connection.
8.3.2 A
IPX/SPX (N
DDING
Windows 95/98:
1. In the Network dialog box, Configuration tab, click Add. The Select Network
Component Type dialog box opens.
2. Select Protocol and click Add. The Select Network Protocol dialog box opens.
3. In the Manufacturers box, select Microsoft. In the Network Protocols box,
select IPX/SPX-compatible Protocol.
4. Click OK (twice) to return to, and then close, the Network dialog box.
-U
A
(N
IAL
P
DAPTER
S
OVELL
ERVER
CHAPTER 8: LAN Client Settings
S
C
OVELL
ERVER
ONNECTION
C
)
ONNECTION
)
101
Advertisement
Table of Contents
