Table of Contents
Advertisement
4. Remove the screws (pre–heat lamp 2 / flash lamp 3) securing the lamp terminals,
and extract the lamps from the bracket.
5. Of the screws (2) fastening the rear side's bracket, remove the screw holding the
pre–heat lamp. Loosen the screw for the flash lamp, shift the bracket outward,
and then remove the pre–heat lamp.
The lamps are fragile. Take care when handling.
Never touch lamps with your hands. Always use a dry tissue or wipe (be sure
lamps are cool). Any contamination of the lamp glass will cause a hot spot, and
the lamp may fail prematurely due to the glass melting or breaking. This is also
true for the cover glass.
10–30
Flash (xenon) lamp
Pre–heat (halogen) lamp
CAUTION
Mechanical System
Advertisement
Chapters
Table of Contents
