Table of Contents
Advertisement
9. Ensure that the tractor alignment tools can be easily removed. If they are too tight
or too loose, make the adjustment again.
10. Remove the tractor alignment tools.
11. Return the left tractor spacer, left and right tractors, and clamp (or "C" clip) to
their original positions.
12. Load the paper.
13. Print a configuration report and press page eject after the job is complete. Verify
that the tractor holes on the paper are still on the tractor pins. Repeat this test 10
times.
Mechanical System
10–97
Advertisement
Chapters
Table of Contents
