Belt Removal Procedures; Power Stacker Cover - Printronix L5000 Series Maintenance Manual

Belt Removal Procedures

This section describes the mechanical structure of the power paper stacker and how
to detach the various belts.
The power stacker should be reassembled in the reverse order of the procedures
described in this section. Return the screws to their original positions, as they may
vary in type. Designations such as "screws (3)" represent the number of screws.
For safety, always disconnect the power supply plug before removing parts.
Never operate the power stacker with parts removed.
Zur Sicherheit sollten Sie immer den Netzstecker herausziehen, ehe Sie Teile
entfernen. Niemals den Lader mit fehlenden Teilen bedienen.

Power Stacker Cover

The cover protects the power stacker mechanism. Follow these steps to remove the
cover.
1. Detach the connector which is connected to the stacker cover.
2. Remove knob D.
E–30
DANGER
GEFAHR
Optional Power Paper Stacker