Printronix L5000 Series Maintenance Manual page 86

Drum motor drive belt
The following steps describe how to replace the drum motor drive belts. Three (3)
belts are installed with the drum motor drive unit and should be removed in the
following order: Belt A, Belt B, and Belt C.
Belt A (703531–032)
Belt B (703531–031)
Belt C (703531–031)
1. Remove Belt A, which is pulling the tension roller downward, from Pulley E.
Pulley E
Tension roller
Belt B (703531–032)
Belt C (703531–032)
2. Remove Belt B from turning Pulley F.
3. Remove Belt C from turning Pulley G.
4. New belts are installed in reverse order.
10–62
Mechanical System