Led Array Unit - Printronix L5000 Series Maintenance Manual

Multifunction printer

Hide thumbs Also See for L5000 Series:

Table of Contents

LED Array Unit

It is necessary to remove the developing unit ahead of time in order to remove this

unit (see "Developing Unit" on page 10–21).

1. Disconnect the connectors from the LED print head unit, and remove the screw

(1) on the head thermistor terminal.

2. Remove the screws (3) on the metal fittings which hold the heat pipe, then

remove the heat pipe by moving it toward the rear.

Head thermistor

Mechanical System

Table of Contents