Dataproducts Parallel Interface Configuration
The printer is configured for the Dataproducts interface via the "Host Interface"
menu. The following interface configuration parameters may be modified to meet
specific application requirements:
Data Bit 8
Paper Instruction Line
Data Polarity
Strobe Polarity
Data Request Polarity
Ready Polarity
On Line Polarity
Paper Instruction Polarity
Host I/O Interfaces
Enable* or Disable
Enable or Disable*
Standard* or Inverted
Standard* or Inverted
Standard* or Inverted
Standard* or Inverted
Standard* or Inverted
Standard* or Inverted
* = Factory default setting
F–11