Centronics Parallel Interface Configuration
The printer is configured for the Centronics interface via the "Host Interface" menu.
The following interface configuration parameters may be modified to meet specific
application requirements:
Data Bit 8
Paper Instruction Line
Data Polarity
Strobe Polarity
ACK Polarity
Busy Polarity
Select Polarity
Fault Polarity
Paper Instruction Polarity
Paper Empty Polarity
F–8
Enable* or Disable
Enable or Disable*
Standard* or Inverted
Standard* or Inverted
Standard* or Inverted
Standard* or Inverted
Standard* or Inverted
Standard* or Inverted
Standard* or Inverted
Standard* or Inverted
* = Factory default setting
Host I/O Interfaces