Printronix L5000 Series Maintenance Manual page 87

Output roller drive belts
Five (5) belts, A through E, are incorporated into the roller drive mechanism. These
belts must be removed in the following order: A, B, D, E, and C.
Belt E (703531–030)
Belt D (703531–029)
Belt A (703531–028)
Belt B (703531–031)
Belt C (703531–031)
1. Remove belt A by removing the spring and pulling up the tension roller.
2. Remove the E–ring fastened to the rotation shaft on which pulley G is fastened,
and then remove belt B by turning pulley G.
Tension roller
Pulley G
Belt A (703531–028)
E–ring
Belt B
Mechanical System 10–63