Table of Contents
Advertisement
Status confirmation processing
Checks the detection data of the sensors and switches within the paper feeding unit.
If there is any abnormality, executes abnormality processing.
Communication processing
Loads data transmitted from the printer, executes command analyzing processing,
and returns status.
Driving the stacker
Initializes, drives, and stops the stacker.
Driving the elevator motor
Switches modes between stop, auto, and down. Also initializes the elevator motor
during printer initialization.
Driving the swinger motor
Initializes and terminates the swinger. Executes normal action, 1/2 inch feed action
(line feed), 1–page feed action (page feed), start position changing action, over–run
action, and paper output action.
Driving the assisting arm drive motor
Initializes and terminates the assisting arm. Executes normal action, 1/2 inch feed
action, 1–page feed action, start position changing action, over–run action, and paper
output action.
Switch monitoring
Checks the action of the 3 elevator switches (4 switches on version 2) on the front
face (output side) of the unit.
Optional Power Paper Stacker
E–29
Advertisement
Chapters
Table of Contents
