Table of Contents
Advertisement
RS–232 Serial Interface Configuration
The printer is configured for the RS–422 serial interface via the "Host Interface"
menu. The following interface configuration parameters may be modified to meet
specific application requirements:
Host Protocol
Baud Rate
Data Word Length
Stop Bits
Parity
Data Terminal Ready Function
Request to Send Function
Data Terminal Ready Polarity
Request To Send Polarity
Buffer Size
Number of Buffers
FIFO Trigger
Diagnostics
NOTE: Only the factory default setting is shown above. Refer to the User's Manual
Host I/O Interfaces
for additional options.
None
9600
8 Data Bits
1 Bits
None
On/Offline and Buffer
On/Offline and Buffer
Normal
Normal
8192 Bytes
2
14 Bytes
None
F–15
Advertisement
Chapters
Table of Contents
