Table of Contents
Advertisement
Motherboard
1. Remove the printer rear cover (page 10–102).
2. Remove the screws and washers (4 each) from the host interface panel and
remove the panel (page 10–104).
3. Grasp the edge of the motherboard and pull it slightly out of the card cage to gain
access to the 6 interface cables connected to the edge–mounted connectors on the
motherboard.
4. Disconnect the cables (6) and slide the motherboard out of the card cage.
5. To install the motherboard, reverse the above steps.
Mechanical System
10–103
Advertisement
Chapters
Table of Contents
