Table of Contents
Advertisement
3. Remove the screw (1) fastened to the scuff roller shaft, and remove the flange.
Belt E
Flange H
Screw
Belt D
4. Remove belts D and E.
5. Remove belt C by turning pulley H.
6. Remove the screws (3) fixing the feed motor to the bracket, and then remove the
motor with the bracket attached.
Pulley H
Belt C
Motor frame
Screw
7. Remove belt C.
8. Install new belts and the associated parts removed.
10–64
Mechanical System
Advertisement
Chapters
Table of Contents
