Overview
The printer provides connections on the right rear side panel for the following host
I/O interfaces:
Centronics Parallel Interface
Dataproducts Parallel Interface
Serial Interface (RS–232 or RS–422)
All three interfaces are active simultaneously. The parameters for each interface are
selected through the control panel via the "Host Interface" menu, as described in the
User's Manual.
The location of the interface connectors is shown in Figure F–1.
You must supply the interface cable to connect the printer to your host computer. To
facilitate the choice or manufacture of an interface cable for your application, pin
assignments for the Centronics, Dataproducts, and Serial interfaces are provided in
this appendix.
F–2
Host I/O Interfaces