Table of Contents
Advertisement
Sleeve motor (SLM) / Magroll motor (MRM)
1. Remove the connectors, one for the sleeve motor, the other for the magroll motor.
2. Remove the screws (8) fastening the assembly bracket with motors.
Bracket
Sleeve motor
Connector
Magroll motor
3. Remove screws securing motors from rear of bracket.
4. Remove set screws and gears. Remove motors.
5. When replacing gear 3, remove the E–ring which attaches the gear to the shaft.
Set screws
Gear
"E" ring
Motor screw
Gear 3
Gear
Mechanical System
10–49
Advertisement
Chapters
Table of Contents
